• Home
  • Posts tagged "mobile repair"
  • (Page 3)

What To Do After You Buy a Used Vehicle in Houston

So you’ve bought a used car in the Houston area. How do you know what you’re getting? It is hard to know what you’re getting because people in the Houston area sell cars for different reasons. Think about why you’ve sold cars. Did you just want something new or were there problems that you wanted to run away from. Maybe it was a little of both.

Used cars with 25,000 to 35,000 miles on them are often lease returns, corporate program cars or vehicles that have done duty in rental fleets. We feel pretty confident because they’re newer and may still be under warranty. But how well have they been maintained?

If you plan on owning a car for a long time, you’ll keep up on the maintenance so that you can avoid expensive repairs down the road. But, if you know you’re only going to have the car for two or three years, you may not be so committed to maintenance. It would be easy to think that skipping an oil change here and there wouldn’t ruin a brand new engine. Then it’ll be someone else’s problem when it comes time to pay for the damage.

It would be very tempting to skip the 30,000 mile service if you knew you’d be turning in your leased vehicle in a couple of months.

If the vehicle didn’t come with maintenance records, you need to assume the worst. Most likely the coolant system and transmission have never been serviced. The cabin air filter has probably not been changed and a fuel system cleaning may be in order.

You’ll want Mobile Tune Up and Repair to check the air conditioning, battery, engine air filter, serpentine belt and hoses. An inspection at Mobile Tune Up and Repair is well worth the cost.

And if your “new” used vehicle has more miles on it, an inspection is even more important. Check your owner’s manual or talk with your service advisor at Mobile Tune Up and Repair (call 281-463-4211) about what should have been done. Please don’t forget the timing belt; that can be very expensive if it fails.

Mobile Tune Up and Repair will help you with a plan to take care of critical services and get the rest caught up. If your budget won’t allow you to take care of everything right away, we can help you prioritize your needs and get it taken care of over the next several months. And remember to keep your maintenance records. They’ll help you get top dollar when it’s time for you to sell.

Mobile Tune Up and Repair
17807 Kieth Harrow Blvd
Houston, TX 77084
281-463-4211

By Amanda Cox • February 26, 2013 • 7:23 pm • Leave a comment

Fuel Injectors

The last new car sold with a carburetor in North America rolled out of the dealership in 1990. Since then, all new vehicles have had fuel injectors. In very simple terms, a fuel injector is a valve that squirts fuel into your engine. Your engine control computer tells the fuel injector how much gas to deliver as well as the precise time it should be delivered. Of course this happens thousands of times a minute. Fuel injection is a much more precise way of delivering fuel than carburetors. That translates into better fuel economy and power. Virtually all fuel injectors for gas engines are known as port fuel injectors because they deliver the fuel to a port just outside the cylinder. Port fuel injectors operate at about 40 to 80 pounds per square inch of pressure.

A few auto makers have introduced gas direct injection systems on some engines recently. These systems inject the gas directly into the cylinders under very high pressure – hundreds of times the pressure of port injection systems. Although more complicated, direct injection technology promises greater power with improved fuel economy, so we can expect to see more of it in the future.

As you can see, the level of precision required of your fuel injectors is very high. They need to be operating properly in order for your car to run right.

High temperatures under your hood and variations in gas quality cause fuel injectors to become fouled with wax, dirt, and carbon. Injectors can become partially clogged, preventing them from delivering the proper amount of fuel at the correct pressure. The design of each engine requires a specific spray pattern from the fuel injector that might be altered when the injector is dirty. When injectors are dirty, the fuel doesn’t burn as efficiently resulting in poor fuel economy and loss of power. So it is important to keep your fuel injectors clean.

Skilled service technicians at Mobile Tune Up and Repair in Houston can perform a fuel system service for you. (Visit http://johnhoffner.autotipsvideo.com/contact-us/.) That is a fuel system service – not just fuel injector cleaning. That is because the fuel has a lot of ways to become dirty or contaminated between the gas tank and the fuel injector. A fuel system service starts with a fuel filter replacement. This filter cleans the gas as it leaves the tank. The various parts of the fuel intake system need to be cleaned from time to time to remove harmful gum, deposits and varnish. Finally, the fuel injectors are cleaned so that they operate properly and deliver the right amount of fuel at the right time.

Your Cypress area service center uses a process for cleaning your fuel system that includes state-of-the-art cleaning chemicals as well as some old fashioned scrubbing. Proper maintenance of your fuel system means that you will spend less on gas, enjoy strong performance and prevent costly repairs down the road.

By Amanda Cox • • 7:23 pm • Leave a comment

PCV Valve Replacement

The energy from exploding fuel is what powers your engine. But some of the vapors from the explosions escape into the lower part of the engine, called the crankcase. The crankcase is where your engine oil hangs out. These gases are about 70% unburned fuel. If the gases were allowed to stay in the crankcase, they would quickly contaminate the oil and turn it to sludge. Sludge is one of the biggest enemies of your engine, clogging it up, eventually leading to expensive failures. Also, the pressure build up would cause seals and gaskets to blow out. Therefore, these gases need to be vented out.

Gasoline engines used to simply have a hose that let the poisonous fumes vent out into the air. In 1963, the federal government required gas engines to have a special one-way valve installed to help reduce dangerous emissions. Diesel engines are not required to have these valves.

The positive crankcase ventilation, or PCV, valve routes crankcase gases through a hose and back into the air intake system where they are re-burned in the engine. Fresh, clean air is brought into the crankcase through a breather tube. It’s really a pretty simple system, but does an important job. The re-circulating air removes moisture and combustion waste from the crankcase, preventing sludge. This extends not only the life of your oil, but the engine as well. The PCV relieves pressure in the crankcase, preventing oil leaks.

Eventually, the PCV valve can get gummed up. Then it can not move enough air through the engine to keep it working efficiently. If the PCV valve is sticking enough, you could have oil leaks, excess oil consumption and a fouled intake system. If you experience hesitation or surging or an oil leak, it may be a sign of PCV value problems. Your owners’ manual may give a recommendation for when the PCV valve should be replaced – usually between 20,000 mi/32,000 km and 50,000 mi/80,000 km. Unfortunately, some manufacturers don’t list a recommendation in the manual, so it can be easy to overlook.

Many PCV system problems can be diagnosed with a visual inspection. Fortunately, PCV valve replacement is both quick and inexpensive. Proper oil changes will greatly extend the life of the PCV valve. Skipping a few recommended oil changes can allow varnish and gum to build up in the valve, reducing its efficiency. So now when your Houston service technician tells you its time to replace your PCV valve, you will know what he’s talking about. If you have had your car for a while and this is the first you’ve ever heard of a PCV value, ask your tech to check yours out or call Mobile Tune Up and Repair at 281-463-4211.

By Amanda Cox • • 7:22 pm • Leave a comment

Air Conditioning Service In Houston

Hey Houston, TX Do you hear loud noises under the hood when you turn on your air conditioner? Do you only get cool air sporadically? If so, it is time to get your air conditioner checked. It’s real easy to take your car’s air conditioner for granted. Just push the right buttons and out comes cool, dry, clean air. But your air conditioning system needs attention from time to time to help it keep its cool.

When most people in Houston hear the words “air conditioning problems”, it sends a shiver up their spine. That is because the air conditioning system is fairly complex. It has a lot of parts and when it’s broken, it’s expensive to repair.

What things can we do to prevent air conditioning breakdowns?

A common cause of air conditioning failure is leaks. Water and air can leak into the system. The system doesn’t work as well with air in it. And water can cause rust that leads to damage of the A/C components. Also, refrigerant, the stuff that makes the air cold, can leak out, reducing the efficiency of the system, making it work harder to cool the air. Periodically evacuating the air conditioning system and recharging it keeps the proper amount of clean refrigerant in the system so it cools better and lasts longer.

You should also run the air conditioner regularly, even in a frosty Houston winter, so that it lubricates itself and keeps the seals from drying out, which leads to leaks. Your owner’s manual will have recommendations for how often to service your air conditioner. Of course, if it’s not working right, now is the time to get it checked. Mobile Tune Up and Repair can inspect and test your air conditioning and offer evacuation and recharge services. This goes a long way to avoiding having to bring your air conditioner in for major repairs.

New environmental laws have stopped the manufacture of Freon, a refrigerant that was common in cars made before 1993. There is a very limited supply of Freon so the price is very steep. It may not be worth its weight in gold, but it probably is worth its weight in silver. If you have an older vehicle that uses Freon, you may want to consider having it retrofitted to use the new R134-A refrigerant. It will pay for itself in the long run. So, if your AC is just a lot of hot air, bring it in to Mobile Tune Up and Repair for an inspection.

Mobile Tune Up and Repair
17807 Kieth Harrow Blvd
Houston, TX 77084
281-463-4211

By Amanda Cox • • 7:21 pm • Leave a comment

Selecting New Tires and Wheels

Some of us just love tires. All those little rubber hairs on new tires and the smell is wonderful. We live in a great time for tires. No matter how you drive, where you want to go or the look you’re after; there is a tire for you.

The same is true about wheels. The hardest part is choosing from the thousands of wheels available.

We may not be able to help with that, but we can help you get some things in mind before you consult with your Houston tire professional. Let’s start with function and think about how you drive.

For example, maybe you have a large SUV but you don’t drive off-road, so an off-road tread isn’t important. Also, because you are not out bouncing over rocks in the TX backcountry, you don’t need a high profile tire to protect your rims. So that means you can probably go with the low-wide look.

If you have a winter season with rain and snow or if you find you need better ice and snow performance, they make great, high-performance snow tires that won’t make it look like you are driving a tractor.

There really are a lot of options for any given vehicle. You will find it very helpful to have a discussion like this with your Houston tire pro when you need new tires. You can find the best solutions for your driving needs and to make improvements in ride or handling.

Picking a wheel that is the same size as what you are now running is pretty simple. But, it gets trickier if you want to upsize. Just get some help when you go bigger. All that tire and wheel still needs to fit in the available space. You do not want your tires to rub when you turn or hit a bump. You also need to make sure your brakes and suspension bits will fit with your wheel of choice. It doesn’t matter how great your car looks if it’s not drivable.

Taller, wider wheels and tires probably weigh more than your stock shoes. And it’s “unsprung” weight – that has a big impact on brake performance. The upsized shoes increase rotational inertia – if you go too big you may need to upgrade your brakes to compensate.

Another possible problem is an inaccurate speedometer. This happens because the number of rotations can change with the new wheels. Fortunately, speedometers and odometers are all controlled by the engine computer; so it is simple to get it reprogrammed and compensate for the bigger tires.

No matter what you are after: low cost, long life, high performance, traction or stunning good looks, your wheel and tire professional at Mobile Tune Up and Repair in Houston, TX can help you identify your needs and give you a custom fit. With all the options available, you don’t have to compromise. There is a tire out there with your name on it!

By Amanda Cox • • 7:21 pm • Leave a comment
April 2024
M T W T F S S
1234567
891011121314
15161718192021
22232425262728
2930  

Stay Connected!



ajax
ajax