The last new car sold with a carburetor in North America rolled out of the dealership in 1990. Since then, all new vehicles have had fuel injectors. In very simple terms, a fuel injector is a valve that squirts fuel into your engine. Your engine control computer tells the fuel injector how much gas to deliver as well as the precise time it should be delivered. Of course this happens thousands of times a minute. Fuel injection is a much more precise way of delivering fuel than carburetors. That translates into better fuel economy and power. Virtually all fuel injectors for gas engines are known as port fuel injectors because they deliver the fuel to a port just outside the cylinder. Port fuel injectors operate at about 40 to 80 pounds per square inch of pressure.

A few auto makers have introduced gas direct injection systems on some engines recently. These systems inject the gas directly into the cylinders under very high pressure – hundreds of times the pressure of port injection systems. Although more complicated, direct injection technology promises greater power with improved fuel economy, so we can expect to see more of it in the future.

As you can see, the level of precision required of your fuel injectors is very high. They need to be operating properly in order for your car to run right.

High temperatures under your hood and variations in gas quality cause fuel injectors to become fouled with wax, dirt, and carbon. Injectors can become partially clogged, preventing them from delivering the proper amount of fuel at the correct pressure. The design of each engine requires a specific spray pattern from the fuel injector that might be altered when the injector is dirty. When injectors are dirty, the fuel doesn’t burn as efficiently resulting in poor fuel economy and loss of power. So it is important to keep your fuel injectors clean.

Skilled service technicians at Mobile Tune Up and Repair in Houston can perform a fuel system service for you. (Visit http://johnhoffner.autotipsvideo.com/contact-us/.) That is a fuel system service – not just fuel injector cleaning. That is because the fuel has a lot of ways to become dirty or contaminated between the gas tank and the fuel injector. A fuel system service starts with a fuel filter replacement. This filter cleans the gas as it leaves the tank. The various parts of the fuel intake system need to be cleaned from time to time to remove harmful gum, deposits and varnish. Finally, the fuel injectors are cleaned so that they operate properly and deliver the right amount of fuel at the right time.

Your Cypress area service center uses a process for cleaning your fuel system that includes state-of-the-art cleaning chemicals as well as some old fashioned scrubbing. Proper maintenance of your fuel system means that you will spend less on gas, enjoy strong performance and prevent costly repairs down the road.

The energy from exploding fuel is what powers your engine. But some of the vapors from the explosions escape into the lower part of the engine, called the crankcase. The crankcase is where your engine oil hangs out. These gases are about 70% unburned fuel. If the gases were allowed to stay in the crankcase, they would quickly contaminate the oil and turn it to sludge. Sludge is one of the biggest enemies of your engine, clogging it up, eventually leading to expensive failures. Also, the pressure build up would cause seals and gaskets to blow out. Therefore, these gases need to be vented out.

Gasoline engines used to simply have a hose that let the poisonous fumes vent out into the air. In 1963, the federal government required gas engines to have a special one-way valve installed to help reduce dangerous emissions. Diesel engines are not required to have these valves.

The positive crankcase ventilation, or PCV, valve routes crankcase gases through a hose and back into the air intake system where they are re-burned in the engine. Fresh, clean air is brought into the crankcase through a breather tube. It’s really a pretty simple system, but does an important job. The re-circulating air removes moisture and combustion waste from the crankcase, preventing sludge. This extends not only the life of your oil, but the engine as well. The PCV relieves pressure in the crankcase, preventing oil leaks.

Eventually, the PCV valve can get gummed up. Then it can not move enough air through the engine to keep it working efficiently. If the PCV valve is sticking enough, you could have oil leaks, excess oil consumption and a fouled intake system. If you experience hesitation or surging or an oil leak, it may be a sign of PCV value problems. Your owners’ manual may give a recommendation for when the PCV valve should be replaced – usually between 20,000 mi/32,000 km and 50,000 mi/80,000 km. Unfortunately, some manufacturers don’t list a recommendation in the manual, so it can be easy to overlook.

Many PCV system problems can be diagnosed with a visual inspection. Fortunately, PCV valve replacement is both quick and inexpensive. Proper oil changes will greatly extend the life of the PCV valve. Skipping a few recommended oil changes can allow varnish and gum to build up in the valve, reducing its efficiency. So now when your Houston service technician tells you its time to replace your PCV valve, you will know what he’s talking about. If you have had your car for a while and this is the first you’ve ever heard of a PCV value, ask your tech to check yours out or call Mobile Tune Up and Repair at 281-463-4211.

Hey Houston, TX Do you hear loud noises under the hood when you turn on your air conditioner? Do you only get cool air sporadically? If so, it is time to get your air conditioner checked. It’s real easy to take your car’s air conditioner for granted. Just push the right buttons and out comes cool, dry, clean air. But your air conditioning system needs attention from time to time to help it keep its cool.

When most people in Houston hear the words “air conditioning problems”, it sends a shiver up their spine. That is because the air conditioning system is fairly complex. It has a lot of parts and when it’s broken, it’s expensive to repair.

What things can we do to prevent air conditioning breakdowns?

A common cause of air conditioning failure is leaks. Water and air can leak into the system. The system doesn’t work as well with air in it. And water can cause rust that leads to damage of the A/C components. Also, refrigerant, the stuff that makes the air cold, can leak out, reducing the efficiency of the system, making it work harder to cool the air. Periodically evacuating the air conditioning system and recharging it keeps the proper amount of clean refrigerant in the system so it cools better and lasts longer.

You should also run the air conditioner regularly, even in a frosty Houston winter, so that it lubricates itself and keeps the seals from drying out, which leads to leaks. Your owner’s manual will have recommendations for how often to service your air conditioner. Of course, if it’s not working right, now is the time to get it checked. Mobile Tune Up and Repair can inspect and test your air conditioning and offer evacuation and recharge services. This goes a long way to avoiding having to bring your air conditioner in for major repairs.

New environmental laws have stopped the manufacture of Freon, a refrigerant that was common in cars made before 1993. There is a very limited supply of Freon so the price is very steep. It may not be worth its weight in gold, but it probably is worth its weight in silver. If you have an older vehicle that uses Freon, you may want to consider having it retrofitted to use the new R134-A refrigerant. It will pay for itself in the long run. So, if your AC is just a lot of hot air, bring it in to Mobile Tune Up and Repair for an inspection.

Mobile Tune Up and Repair
17807 Kieth Harrow Blvd
Houston, TX 77084
281-463-4211

Some of us just love tires. All those little rubber hairs on new tires and the smell is wonderful. We live in a great time for tires. No matter how you drive, where you want to go or the look you’re after; there is a tire for you.

The same is true about wheels. The hardest part is choosing from the thousands of wheels available.

We may not be able to help with that, but we can help you get some things in mind before you consult with your Houston tire professional. Let’s start with function and think about how you drive.

For example, maybe you have a large SUV but you don’t drive off-road, so an off-road tread isn’t important. Also, because you are not out bouncing over rocks in the TX backcountry, you don’t need a high profile tire to protect your rims. So that means you can probably go with the low-wide look.

If you have a winter season with rain and snow or if you find you need better ice and snow performance, they make great, high-performance snow tires that won’t make it look like you are driving a tractor.

There really are a lot of options for any given vehicle. You will find it very helpful to have a discussion like this with your Houston tire pro when you need new tires. You can find the best solutions for your driving needs and to make improvements in ride or handling.

Picking a wheel that is the same size as what you are now running is pretty simple. But, it gets trickier if you want to upsize. Just get some help when you go bigger. All that tire and wheel still needs to fit in the available space. You do not want your tires to rub when you turn or hit a bump. You also need to make sure your brakes and suspension bits will fit with your wheel of choice. It doesn’t matter how great your car looks if it’s not drivable.

Taller, wider wheels and tires probably weigh more than your stock shoes. And it’s “unsprung” weight – that has a big impact on brake performance. The upsized shoes increase rotational inertia – if you go too big you may need to upgrade your brakes to compensate.

Another possible problem is an inaccurate speedometer. This happens because the number of rotations can change with the new wheels. Fortunately, speedometers and odometers are all controlled by the engine computer; so it is simple to get it reprogrammed and compensate for the bigger tires.

No matter what you are after: low cost, long life, high performance, traction or stunning good looks, your wheel and tire professional at Mobile Tune Up and Repair in Houston, TX can help you identify your needs and give you a custom fit. With all the options available, you don’t have to compromise. There is a tire out there with your name on it!

Today at Mobile Tune Up and Repair we want to talk with you about a very important safety issue. This automotive safety warning is coming from a very unusual source: fire fighting experts. You’ve probably heard of E-85 gasoline being offered in the Houston area. Some newer vehicle models are specifically built to run on E-85 – the rest are not.

Does your vehicle use E-85 gasoline? Bring it down to Mobile Tune Up and Repair at 17807 Kieth Harrow Blvd in Houston, TX 77084 to find out, or give us a call to make an appointment by calling 281-463-4211.

E-85 gasoline has been developed to fight air pollution and reduce oil consumption. E-85 fuel is a mix of 85% ethanol, a grain-base alcohol, and 15% gasoline. So-called Flex-Fuel vehicles are designed to use either normal gasoline or E-85 gas. The result is lower harmful exhaust emissions to our local Houston community.

All gas engines can run with up to 10% ethanol and in fact a lot of gasoline sold in the Houston TX area does contain some ethanol. The problem comes when well meaning people without Flex Fuel certified vehicles put E-85 into the tank.

At a 15% concentration, the potential for problems arises. Because of the chemical differences between ethanol and gasoline, special seals and gaskets are needed for Flex Fuel vehicles in Houston TX. In a normal engine, the ethanol in E-85 gas will eat away important seals and gaskets. This leads to gas and oil leaks.

You can imagine the fire hazard caused by leaking gasoline. Fire fighting experts caution consumers to only use E-85 if they know they vehicle is certified to handle it. They expect vehicle fires to increase because of using the wrong fuel in non-Flex Fuel vehicles.

So are people who don’t have a Flex Fuel vehicle but use E-85 to help the environment actually putting themselves at risk? Yes. In fact, service and repair centers in Houston TX are being warned to purchase fire extinguishers that use the special foam needed to extinguish ethanol fires as a precaution in case starting-up an ethanol damaged engine leads to a fire.

Obviously, this isn’t something you want to have in your Houston TX garage at home, either. If you have a Flex-Fuel certified vehicle, feel free to protect the environment by using E-85 gasoline. If not – please do not use E-85 in an engine that’s designed to run on unleaded gasoline only. At Mobile Tune Up and Repair we are concerned about your safety. If you have questions or want to find out how to determine if your vehicle can safely use E-85, go to www.e85fuel.com for more resources.

Take a look at our attached auto safety tips video from Auto Tips Videos.